1100 | ½” Minus Crusher Chips

This product is ideal for residential driveways, trails, garden pathways, and much more.

1200 | 1 - 2” Clear Rock

This product is ideal for house siding, driveways, and is an alternative to lawns or gardens around houses and buildings.

1300 | 8 - 20” Rock

This bolder-sized product can be utilized for wall building, stepping stones, fireplaces, and other unique applications.

1400 | Select Rock

Customer-selected rocks to meet specific shape, size, or other requirements.

*If an excavator is requested for loading, an equipment handling fee of $5/tonne will be applied to all loads of this product.

OUT OF STOCK - 1600 | 3” Sub Base

TEMPORARILY OUT OF STOCK

This eco-friendly aggregate includes crushed concrete. It is suitable for contracting and landscaping purposes.

1000 | Quarry Run (blasted bedrock)

Blasted bedrock, typically 1000mm minus.

1175 | 32mm x 50mm (2") clear crushed stone

Produced from blasted bedrock for the purpose of asphalt production, this product is 100% fractured with no natural/round stone present. It makes suitable drain rock and can also be used in stone column applications.

1200 | 16mm x 4.75mm Class 1 Asphalt Aggregates

Produced from blasted bedrock for the purpose of asphalt production, this product is 100% fractured with no natural/round stone present. It is suitable for drain rock and other applications.

1300 | Rip Rap 75mm x 200mm (6")

Produced from blasted bedrock, this rip rap product is commonly used in erosion mitigation, particularly in ditch lining applications and slope armouring. It is also suitable for use in gabion baskets on mechanically stabilized earth (MSE) walls.

1350 | Rip Rap 100kg

Produced from blasted bedrock, this rip rap product is suitable for shoreline and river bank protection as well as culvert/stormwater outfall erosion protection.

1375 | Rip Rap 500kg

Produced from blasted bedrock, this rip rap product is suitable for ocean shoreline and riverbank protection. It can also be used for culvert/stormwater erosion protection but is typically too large in this application unless extremely high-water flows are expected.

1500 | 25mm Well Graded Base (MoTI/DoK spec)

Produced from a blend of blasted bedrock and pit run material, this product meets the British Columbia Ministry of Transportation and Infrastructure’s (MoTI) 2016 Standard Specifications for Highway Construction. It is most commonly used as road base beneath asphalt, for road surfacing and bedding underneath poured and precast concrete structures, and as bedding/surround for culverts and pipes.

1700 | Washed Concrete Sand, 5mm minus (CSA A23.1, FA1)

Produced from a blend of natural sand and gravel, this product meets the Canadian Standard Association’s (CSA) Standard Specifications for Concrete A23.1, FA1. Aside from use in concrete, it is used as bedding/surround material for pipe, culverts, conduit, and electrical cable. It is also used in environmental habitat applications and for aggregate in asphalt production.

1725 | 5mm x 10mm Stone, Concrete Aggregate (CSA A23.1, 10-2.5

Produced from a blend of natural sand and gravel, this product contains fractured and natural/round particles and meets the Canadian Standard Association’s (CSA) Standard Specifications for Concrete A23.1, 10-2.5. Aside from use in concrete, this product is used as drain rock, winter abrasives and pipe bedding/surround in wet or submerged applications.

1740 | Washed Cobble 50mm x 250mm

Produced from a blend of natural sand and gravel, this product is washed and contains no fractured stone particles, it is 100% natural/round. It is used in environmental habitat and stream diversion applications. It is also suitable for use in gabion baskets on mechanically stabilized earth (MSE) walls and can be used as erosion control for ditch lining and slope armoring, however, Rip Rap 75mm x 200mm (6") is more suitable in this application.